ATN PS-23-3P Night Vision Goggles The PS23-3P Night Vision goggles is one of the most versatile Night Vision devices available. This unit can be handheld, head-mounted for hands free usage, it is camera/ camcorder adaptable, and can be 3x binocular. The intergrated IR illuminator enhances the ability of the user to read maps and operate in confined, zero light areas. The PS23-3P is available with an ITT Pinnacle™ image intensifier for optimal performance. The PS23-3P Night Vision goggles are a complex opticoelectronic system for individual use. The device consists of the objective lens assembly, eyepiece and the body. The body contains an image intensifier tubes assembly with an integrated high voltage power source and the battery housing.
ITT Pinnacle™ Image Intensifier Tubes
ATN Night Vision units with the 3P designation use ITT Pinnacle™ Image Intensifier tubes. The industry leading ITT Pinnacle™ image tubes utilize a gated power supply providing truly outstanding performance in high-light or light-polluted areas, such as urban environments. The Pinnacle™ tube with gated power supply minimizes any “halo” effects. “Halo” is often associated with using Night Vision devices in an urban area where random street lights are often an issue with early Generation Night Vision devices. Night Vision units with Pinnacle™ tubes have a typical resolution of 64-72lp/mm and a typical signal to noise ratio of 24. All Night Vision devices utilizing Pinnacle™ Image Intensifier tubes come with ITT data record sheet. Units with Pinnacle™ tubes are not available for export. A signed export compliance and end use statement is required prior to shipping of these units.
*Pinnacle is a registered trademark of ITT Night Vision”
Key Features:
- Top of the line ITT Pinnacle™ iamge intensifier tube
- Super fast lens system provides the user with a clear and sharp image
- Built-in Infra Red illuminator lets you see even in total darkness
- 3x lenses (optional)
- Adjustable Flip-up headmount for hands free use
- IR-on and Low Battery indicators
- Single switch knob operation
- Automatic brightness control for high-light protection , unit will turn off automatically if exposed to excessive light for more than 10 seconds. If the unit is move away from the bright light, it will reactivate automatically.
- Rugged and versatile design
- Camera/camcorder-adaptable
- Uses one 3V lithium battery
- Environmental: Water resistant
- Two year limited warranty
Product Specifications:
- Intensifier Tube 3rd Gen. Pinnacle™
-
- Magnification 1X (optional 3X)
-
- Resolution 64-72 lp/mm
-
- Signal to noise ratio 22-28
-
- Photocathode Sensitivity 2000-2800
-
- Lens System 24 mm; F1:1.2
-
- Interpupillary adjustment 55mm-72mm
-
- Field of view 40°
-
- Range of Focus 0.25m to infinity
-
- Power Supply 3 volt battery (CR123A)
-
- Battery Life 35 hours (10 hours with IR illuminator)
-
- Operating Temp. -40 +50°C
-
- Dimensions 151x85x120 mm (6” x 3.4” x 4.7”)
-
- Weight 0.7kg (1.5 lb)
-
- Storage temperature -50 +70°C
-
|
