ATN PS-23-3 Night Vision Goggles The PS-23 Night Vision Goggles is one of the most versatile Night Vision devices available. This unit can be handheld, head-mounted for hands free usage, it is camera/ camcorder adaptable, and can be 3x binocular. The intergrated IR illuminator enhances the ability of the user to read maps and operate in confined, zero light areas. The PS-23 is available with several image intensifier options to meet a wide array of specification requirements. The PS-23 Night Vision goggles is a complex opticoelectronic system for individual use. The device consists of the objective lens assembly, eyepiece and the body. The body contains an image intensifier tubes assembly with an integrated high voltage power source and the battery housing.
3rd Gen Image Intensifier Tubes
Battle proven generation 3 technology. Our gen. 3 units provide exceptional quality image resolution under varying light conditions. Units with 3rd gen image intensifier tubes have a typical resolution of 64lp/mm and a typical signal to noise ratio of 20.
Key Features:
- High Quality light intensifier tube
- Super fast lens system provides the user with a clear and sharp image
- Built-in Infra Red illuminator lets you see even in total darkness
- Adjustable Flip-up headmount for hands free use
- IR-on and Low Battery indicators
- Single switch knob operation
- Automatic brightness control for high-light
protection , unit will turn off automatically if exposed to excessive light for more than 10 seconds. If the unit is move away from the bright light, it will reactivate automatically.
- Rugged and versatile design
- Camera/camcorder-adaptable
- Uses one 3V lithium battery
- Environmental: Water resistant
Product Specifications:
- Intensifier Tube 3rd Gen.
-
- Magnification 1X (optional 3X)
-
- Detection range 300 m/y
-
- Recognition range 250 m/y
-
- Lens System 24 mm; F1:1.2
-
- Field of view 40°
-
- Interpupillary adjustment 55mm-72mm
-
- Resolution 64-72 lp/mm
-
- Signal to noise ratio 20 Typical
-
- Range of Focus 0.25m to infinity
-
- Power Supply 3 volt battery (CR123A)
-
- Battery Life 35 hours (10 hours with IR illuminator)
-
- Operating Temp. -40 +50°C
-
- Waterproof. 20 m for 1 hour
-
- Dimensions 120 x 80 x 119 mm
4.7” x 3.2” x 6”
-
- Weight 0.7kg (1.6 lb)
-
- Storage temperature -50 +70°C
-
|
